Llariza - Content Manager - Legend Fence Corp.

What to Consider for Driveway Gate Installation

September 7, 2022 by Llariza - Content Manager

If you are considering installing a driveway gate, there are many factors to consider. The type of gate, the materials, the size, and the installation all need to be taken into account. This blog post will help you think through all of the considerations so that your gate is installed correctly and meets your needs.

Local Building Codes

One of the first things you should consider when installing a driveway gate is your local building codes. Depending on where you live, there may be certain requirements that must be met in order for your gate to be considered legal.

For example, some cities require that all driveway gates be at least 8 feet wide in order to allow emergency vehicles to pass through. Others may have height restrictions in place in order to prevent people from climbing over the gate.

In addition, there may also be requirements regarding the materials that can be used in the construction of the gate. By familiarizing yourself with your local building codes, you can ensure that your driveway gate meets all the necessary requirements.

These codes can vary significantly from one area to the next, and they often change over time. Ignoring the building codes can result in fines, or even the need to tear down the gate and start over.

Contact your local building department and request a copy of the most recent codebook. Once you have the codebook, take some time to review the relevant sections. Pay particular attention to any requirements for permits or inspections. If you have any questions about the code, don’t hesitate to reach out to a qualified contractor for guidance.

Slope of Terrain

Before you choose a driveway gate, it’s important to take the slope of your terrain into account. One important factor to consider when installing a driveway gate is the slope of the terrain.

A driveway gate that is installed on level ground will be much easier to open and close than one that is installed on a steep hill. If the driveway is too steep, it could be difficult to open and close the gate, and the weight of the gate could damage the driveway over time. Conversely, if the driveway is too flat, water could pool in front of the gate, making it difficult to open.

If your driveway is on a slope, you’ll need to choose a gate that can accommodate the incline. For instance, a sliding driveway gate may be a good option, as it can be installed with an angle to match the slope of your driveway. Alternatively, you may opt for a swing driveway gate, which can also be installed at an angle to accommodate a sloped driveway.

If the driveway gate is going to be used frequently, it is important to make sure that it is installed in a location that is easily accessible. If the driveway gate is only going to be used occasionally, then it can be installed in a more difficult to reach location. In either case, it is important to take the slope of the terrain into account when planning for driveway gate installation.

To ensure that your driveway gate is installed properly, it’s best to consult with a professional who can assess your terrain and recommend the best location for the gate.

Difference in Temperature

When considering driveway gate installation, another important factor to take into account is the temperature differential. This is the difference in temperature between the inside and outside of the gate. If the differential is too great, it can cause the gate to warp or even break. As a result, it’s important to choose a material that can withstand extreme temperature changes.

For example, aluminum is a good choice for driveway gates because it has a low expansion rate and is resistant to corrosion. Similarly, steel is also a good choice for driveway gates because it is strong and durable. However, when choosing a material for your driveway gate, be sure to consult with a professional to ensure that it will be able to withstand the temperature differential in your area.

Driveway gate installation considerations can be broken down into two major categories: environmental concerns and security concerns. Driveway gate installation in high crime areas may warrant extra measures such as a thicker gate, wrought iron construction, or an automatic lock.

Driveway gates installed in cold climates may require the use of thermal break materials to prevent the formation of condensation inside the structure, which could lead to safety hazards. On the other hand, driveway gate installation in very hot climates may necessitate the use of heat-resistant materials to avoid warping or cracking. Proper driveway gate installation is always heavily dependent on the specific location and climate.

Besides, driveway gates are often installed using a system of pulleys and counterweights, which makes them very susceptible to temperature changes. For this reason, it’s important to consider the potential for temperature differential when installing driveway gates. If the difference between the ambient temperature and the temperature of the driveway surface is too great, the gate system may not be able to operate properly.

In addition, extreme changes in temperature can cause the pulleys and counterweights to expand or contract, which can cause the driveway gate to become misaligned. By taking the time to carefully consider the temperatures involved, you can help ensure that your driveway gate installation goes smoothly.

The Material to Use

Driveway gate installation can be made from a variety of materials. Wood is a popular choice because it is strong and durable. However, it requires regular maintenance, such as painting or staining, to keep it looking its best.

Metal driveway gates are also an option. They are typically made from aluminum or steel, which are both strong and durable materials. Metal driveway gates can be powder coated to protect against rust and corrosion.

Driveway gates can also be made from vinyl or composite materials. These materials are low-maintenance and require little to no upkeep. They are also resistant to rot, insect damage, and extreme weather conditions. When choosing a material for your driveway gate installation, consider your budget and the level of maintenance you are willing to perform.

If you have a concrete driveway, then you’ll need to use different materials than if you have an asphalt driveway. The second thing is what kind of climate you live in. If you live in an area with a lot of snowfall, then you’ll want to make sure your driveway gate is made out of a material that can withstand the elements.

Proper Maintenance Tips for Wrought Iron Gates

August 10, 2022 by Llariza - Content Manager

Wrought iron is such an amazing metal to work with. It can be so pliable you could warp it into very intricate and complex designs. If you are looking to install gates to your property, there is no better way to add both grandeur and security to it than wrought iron gates.However, once installed you have to make sure that its beauty and durability are maintained to make it last twice longer.

In this article, you will learn some proven maintenance tips for your wrought iron gates.

Prevent Rusting

Use epoxy primer if you want to prevent rusting on your wrought iron gates. Epoxy primer application only requires a brush or a roller. The first coating must be completely dry before applying another one.

Regular protective sealant application is also helpful for keeping your iron gate safe against harsh environmental elements. Otherwise your gate will tarnish and this will make it vulnerable to rusting. Not to mention that the sight of flaking and bubbling paint would make your iron gate look ugly instead of increasing your property’s curb appeal.

Wax Sealant

You can use a wax sealer that acts as a barrier to ensure water and oxygen won’t penetrate. However, wax sealants could wear out over a period of time. So, you need to apply wax sealant every year.

Metal Sealant

Metal sealants are better than wax sealants in terms of longevity. In most cases, you will apply it again only when the iron gate needs to be repainted.

Sandpaper

But, if rust has already occurred, quickly remove it. Use sandpaper when removing the rust immediately as soon as you notice it. Just rub it away and then consider repainting it as soon as possible to avoid the rust from accumulating.

Paint

Applying paint on the iron gate is also an effective way to keep rusts away. Paint does a good job in protecting the iron gate from damage caused by moisture and air.

Keep it Clean

Clean the iron gates using warm soapy water as soon as you notice the presence of dirt on it. As much as possible, use a mild cleanser. Avoid using solvents, petroleum products or other chemical-based cleaners as these could only do more harm than good to your iron gate. Choose the kind of soap which contains emulsifiers that could help remove stains and grime.

This regular routine would also give you the opportunity to immediately scrub away any rusts before they even have the chance of penetrating deep into the iron. Use a small thin brush to be able to reach those narrow spots. Rinse your iron gate with clean water and allow it to dry by wiping it with a non-abrasive cloth.

Never let the water dry on the iron gate without wiping it with a cloth. The tap water may contain chemicals and minerals that could damage or stain the iron gate.

If you need to clean a very large wrought iron gate, might as well use a pressure washer. A pressure washer works best when you do not just want to spot clean the dirty areas. But, remember to use it with filtered water and definitely not ground water or tap water. Set it in low-pressure so you won’t damage the paint and its surface finish.

Oil, Repair and Replace

Iron gate may need some repairs especially if it has been around for quite a long time. The hinges, latches and fasteners and other parts of it may need to be oiled, repaired or replaced. If you notice a squeaky sound or as soon as you notice that there’s something wrong with your iron gate, take action right away.

Address any issues, even the slightest one the soonest time possible. This way, you can prevent these slight damages from becoming worse. Otherwise, your iron gate may not last longer than expected.

Beware of Plants

Some plants hold moisture which can cause structural damage once they grow on top or very close to your iron gate. If you want to put plants near your gate, make sure they are not the type that will crawl into your fence as they grow. It is better to use wires as support so that the plants will crawl into them and not on the iron gate.

It can be tempting to plant shrubs and hedges near the iron gate and make it look like a beautiful canvas. However, when these plants grow near the iron gate, the gate becomes at risk of being damaged. This is because plants can hold moisture and once this moisture comes in contact with the gate, the formation of rust spots also starts to take place.

If left unnoticed, rust may develop and damage not only the looks but as well as the structural stability of your wrought iron gate. Therefore, you need to be wise in selecting the kind of plant to grow near your iron gates.

Regular Inspection

Conducting regular inspection to your iron gates at least once a month enables you to immediately address any problems before any huge damage can start to occur. Carefully check those grooves and joints and soon after a period of rainy days. The rainy season could wreak havoc on your iron gates so check the gate immediately to spot and remove rusts while they’re still in their early stage of emergence.

Your wrought iron gate does a great job in keeping your loved ones and your property safe. But, don’t just have it installed and forget about caring for it. Observe these proper maintenance tips and you will have a sturdy and beautiful looking wrought iron gate for years to come!

Advantages Of Custom Railings

June 27, 2022 by Llariza - Content Manager

If you’re like most people, you probably think of railings as purely functional items – something that is necessary to ensure safety, but doesn’t really add much to the appearance of a property. However, custom railings can actually be a great way to improve the look of your home or business, while also providing some important safety benefits. In this blog post, we’ll take a closer look at the advantages of custom railings and show you why they might be a good option for your next project.

1. Custom railings are made to fit your specific needs.

Custom railings offer a number of advantages over standard, off-the-shelf options. For one, custom railings can be designed to perfectly match the existing décor of your home. Whether you want a sleek and modern look or something more traditional, custom railings can be made to order.

In addition, custom railings can be designed with safety in mind. If you have young children or pets, you can choose a design that includes a child-proof gate, with pickets that are spaced too closely together for them to slip through.

Or, if you live in an area with high winds, you can opt for a sturdier railing that can withstand strong gusts. If your property is situated in an area with a lot of snowfall, you may want to opt for a sturdier material that can withstand heavy snowfall. Whatever your needs, custom railings can be tailor-made to suit them.

2. Custom railings are available in a wide range of materials and styles.

Some of the most popular materials for custom railings include wood, glass, acrylic and metal. And because they are custom-made, you can choose the exact style and design that you want. As far as styles go, there are endless possibilities – from ultra-minimalist designs to intricate and detailed patterns.

No matter what your personal style may be, there’s a custom railing out there that’s perfect for you. For those looking for a classic look, wood railings are always a popular choice. Many people use wood because it is sturdy and can be stained or painted to match the aesthetics of your home. Wood is a classic choice that offers a warm and natural look. But, wood can rot over time, so it is important to regularly maintain custom railings made from this material.

Another popular option for custom railings is aluminum. Aluminum is durable and weather-resistant, making it a great choice for outdoor railings. It is also relatively easy to install, which can save money on installation costs.

Glass is another popular choice for custom railings. Glass railings provide a sleek, modern look and can be customized to match the style of any home. However, glass is breakable and may require more maintenance than other railing materials. It may not be the best choice if you have young children or pets in your home.

However, if you’re looking for something a little more modern, aluminum or glass railings may be more up your alley. And of course, there are always custom options available as well. Whether you’re looking for a traditional balcony railing or something more modern, custom railings can help you achieve the look you’re after.

Ultimately, the right material for your custom railings will depend on your personal preferences and needs. So no matter what your style or budget, there’s sure to be a custom railing option that’s perfect for you.Take your time browsing through the different options available until you find the perfect custom railing for your home.

3. Custom railings are built to last.

Custom railings are built to last so you won’t have to worry about replacing them anytime soon.

That’s because they’re made from high-quality materials that can withstand the wear and tear of daily use. Unlike mass-produced railings that are made from standard materials, custom railings are made from high-quality materials that are designed to be durable enough against the elements.

Plus, custom railings are designed to fit your specific needs, so you can be sure that they’ll meet your expectations for function and durability. Whether you need a railing for your deck, porch, or patio, custom railings will give you the peace of mind that comes from knowing you’ve made a long-term investment in your home.

Custom railings are not only more durable than mass-produced railings, but they also offer a more stylish look that can enhance the curb appeal of any home. If you’re looking for a railing that will stand the test of time, custom railings are the way to go.

4. Custom railings can add value to your home.

Custom railings can add both function and value to your home. If you live in an area with stairs or uneven terrain, custom railings can provide much-needed support and stability. And, because they are custom-made to your specifications, they can also add a unique touch to your home’s exterior.

If you’re thinking about selling your home, custom railings can also be a selling point. Potential buyers will appreciate the extra safety and security that custom railings provide, and they may be willing to pay more for a home that has them. So, if you’re looking for a way to add value to your home, custom railings may be the perfect solution.

If you are looking for a railing system that is unique and tailored to your specific needs, custom railings are the perfect option. Custom railings are available in a wide range of materials and styles, so you can find the perfect solution for your home. Additionally, custom railings are built to last, which means you can enjoy them for many years to come. Finally, custom railings can add value to your home, making them a wise investment. If you are interested in learning more about custom railings or would like a free estimate, please call Legend Fence today. We would be happy to help!

Why Choose Aluminum Gates?

May 12, 2022March 20, 2022 by Llariza - Content Manager

The primary reason why homeowners decide to install custom gates is for improved security. Therefore, you have to be careful about choosing the type of material for your gate. It has to be something that possesses enough strength that will make it impossible for smash and grab criminals to break in. With repeated use, the gate has to remain fully functional and durable.

When it comes time to install a custom gate for your home, you have a lot of options to choose from. But if you’re looking for something that’s strong, durable, and will last for years to come, aluminum is the way to go. Here are just a few reasons why aluminum is a great choice for your pedestrian, driveway, garden or side entrance gates.

Aluminum Requires Less Maintenance

Aluminum gates require less maintenance because they are not prone to decaying and rusting. This is because aluminum is a kind of metal that is naturally immune to corrosion. Thanks to the aluminum oxide that is present on its surface. The aluminum oxide compound creates an outer layer which is not sensitive to damage that is usually brought about by oxygen.

In addition, aluminum gates have a finish which is made of powder coating that is thicker than enamel. Thus, making its surface resistant to color fading. Since aluminum gates are pretreated with a powder coating, its finish will not be easily damaged by dings and scratches. While small dents and nicks can be easily remedied when you have aluminum gates.

Another best thing about aluminum gates is that you only need a bucket of soapy water, a brush or hose to clean it. You do not have to repaint it and have it repaired on a regular basis for it to maintain its pleasing look. This translates to more money saved on maintenance costs compared to timber, steel or plastic gates.

Furthermore, aluminum gates also do not require much lubrication, compared to steel gates. If your property is situated in areas with extreme weather conditions, then you should know that trolley tracks and gate rollers made from aluminum are more capable of performing better amidst snow and dirt.

Aluminum gates also make use of enclosed trucks and trolleys which also serve as protection when dirt, grime, debris and other outdoor elements combine. This enclosed truck assembly will simply glide on its sealed ball bearings, which are expected to perform well amidst bad climate conditions.

Therefore, you are less likely to experience downtime or suffer from any inconvenience when the gate motor refuses to function during extreme weather. Add in the fact that it is lightweight, thereby giving less pressure on its moving parts so you won’t be seeing yourself going through a lot of hassle like you would if you have gates that need frequent maintenance and repair.

Aluminum Is Lightweight

Aluminum is more than two times lighter than iron. And, there’s nothing better and more durable than having a lightweight gate connected to its post and framework. Being a light material translates to a longer lasting custom gate.

Why? Because the gate motor does not have to work much harder when dragging or lifting the gate every time a person or a car enters or exits the gate. This would mean that for every touch of the button, the aluminum gate is less likely to cause much pressure and tension on its moving parts and motor.

The result is a gate that is more likely to last longer than any other gates made from different materials. Moreover, since its motor doesn’t have to work too hard, it will also cost less power. This would mean less cost on electricity bills as well.

Besides, if you need a custom gate that can withstand gravity and wind, choosing an aluminum cantilever slide gate will prove to be a wise move. The aluminum cantilever slide gate is durable enough to last longer given the fact that the lightweight characteristic of aluminum, coupled with truck track combination will put less pressure on its operator. In turn, the gate will require less power to keep functioning at full throttle.

Aluminum is Easy to Install

One characteristic of aluminum that makes it so easy to install is its weight. It is not too heavy and therefore its framework and posts do not have to be designed, constructed or engineered in a complicated way. This saves you much time and money during the installation process.

Besides, aluminum can also be easily bent or racked in order to fit the direction of the slope when a gate is installed in a hillside. So, if you are planning to have your custom gate installed in an uneven terrain, consider aluminum for an easier, faster and more economical installation.

If you’re looking for an attractive and low-maintenance gate option, aluminum may be the perfect material for you. Our team at Legend Fence has more than two decades of experience in installing and fabricating custom gates. We can help you choose the right style and color of aluminum gate to complement your home’s exterior, and we’ll take care of installation so you can enjoy your new gate worry-free. Give us a call today for a free estimate!

Benefits of Automated Gates for your Business

May 13, 2022February 20, 2022 by Llariza - Content Manager

Automated gates offer a number of benefits for businesses. They also come in different sizes, designs and material. If you’re looking to install an automated gate for your commercial property, consider the benefits first. Then use this information when designing the type of automated gate to be installed. This way, you can rest assured that the gate you choose will bring you all the benefits of having it into your property. Some of these benefits are the following:

Deter Thieves and Burglars

Automated gates are an increasingly common sight at businesses and other commercial properties. While they may seem like a luxury, these custom-made and fabricated gates can actually offer a number of important benefits. Perhaps most importantly, automated gates can help to deter crime. By controlling who has access to the property, businesses can make it much harder for criminals to gain entry.

Automated gates can also help to improve security by making it easier to monitor who is coming and going. In addition, automated gates can provide a measure of privacy and discretion for businesses that don’t want their comings and goings to be on public display. For all these reasons, automated gates that were fabricated and customized to your needs can be a valuable addition to any business property.

Automated gates offer a number of advantages in terms of security, convenience, and aesthetics. They provide a physical barrier that can deter and delay intruders, giving you valuable time to respond. Automated gates can also be programmed to allow only authorized persons onto your property, further enhancing security. When it comes to security, custom automated gates are a wise investment.

Saves Time and Manpower

Automated Gates are a type of mechanized barrier which are used to control or restrict the movement of people, vehicles, or animals. Automated Gates can be found in a variety of settings, including residential complexes, commercial properties, and industrial sites.

They offer a number of advantages over traditional manual gates, including increased security, improved efficiency, and reduced operating costs. Automated Gates are typically made from high-strength materials such as aluminum or steel, which provides superior durability and longevity.

Plus, you can also choose to have it fabricated to match the exterior design of your business establishment. These gates can be operated via a variety of methods, including keypads, remote controls, and fingerprint scanners.

In addition, Automated Gates can be integrated with CCTV systems and alarm systems for added security. Automated Gates can also be integrated with CCTV systems to monitor activity and provide evidence in the event of an incident.

Automated Gates provide a high degree of security by deterring unauthorized entry and exit. It also improves efficiency by eliminating the need for manual operation. Automated Gates also reduce operating costs by minimizing the need for manpower. Automated Gates are an effective solution for businesses looking to improve security, efficiency, and operating costs.

Provides Greater Convenience

Automated gates are becoming increasingly popular for businesses as they provide a number of advantages in terms of security and convenience. Automated gates can be programmed to open and close at specific times, meaning that businesses can control exactly when people have access to the premises.

This can be especially useful for businesses that operate outside of normal office hours. In addition, automated gates can be fitted with security features such as CCTV cameras and intercoms, providing an extra layer of security. Automated gates are also very convenient as they allow people to enter and exit the premises without having to stop and unlock a gate.

This can save a lot of time for businesses that receive a lot of visitors throughout the day. Overall, automated gates offer a number of benefits in terms of security and convenience, making them an ideal solution for businesses.

Promotes Positive Impression

Automated Gates are an impressive way to show customers that your business is up-to-date and ahead of the curve. This is true especially if you’ll have it customized by experts of gate fabrication and installation. By automating the process of allowing access to your property, you can reduce wait times and improve the efficiency of your operations. These automated gates will make your customers and clients think that your business can be trusted, knowing that you are too particular with security and safety, as reflected in the existence of automated gates.

In addition, Automated Gates can also help to improve security by deterring trespassers and controlling who has access to your premises. By investing in customized automated Gates, you can give your business a positive boost that will be sure to impress clients and customers alike. You will create an impression from customers that your company can be trusted and is stable enough to provide them with high quality products and services.

Now that you know the many benefits of having automated gates installed in your property, the next step is to find the right company to do the work for you. Legend Fence has more than 20 years of experience in providing high quality automated, custom and fabricated gates. We never stop until business owners are completely satisfied with the gate they choose.

Factors to Consider When Installing Custom Gates

May 18, 2022January 20, 2022 by Llariza - Content Manager

Installing a gate is a great way to improve the security and aesthetics of your property. There are many factors to consider when installing custom gates, such as the style of gate you want, the materials you want to use, and the opening you need to fit. By considering these factors, you can ensure that your new gate is not only beautiful but also provides the needed security for your home or property.

Homeowner’s Association Guideline

Custom gates are a great way to add style and security to your home. However, before you install a custom gate, it’s important to check with your homeowners association (HOA) to make sure that it meets their guidelines. Some HOAs have strict rules about the materials that can be used for gates, as well as the height and width of the gate.

There are associations that put restrictions on how custom gates should be designed. Others have prescribed colors for homeowners to follow. Failing to obtain permission from your HOA before installing a custom gate could result in costly fines or you will be asked to replace your custom gate. Therefore, it’s always best to err on the side of caution and get approval before making any changes to your property.

Lucky for you if your home belongs to a homeowners’ association that has no restrictions set when it comes to the installation of gates or fences.

Opening Direction of Your Gate

When you have a custom gate installed, you have the opportunity to choose the opening direction. There are a few things to consider when making this decision. First, think about how the gate will be used. If it will be primarily for pedestrian traffic, then an outward-opening gate may be the best option.

This will prevent people from walking into the space between the gate and the fence, which can be dangerous. Outward-opening gates also take up less space, which can be important if you have a small yard. If the gate will be used for vehicles, then an inward-opening gate may be a better choice. This type of gate provides more security, as it is more difficult for someone to drive through an inward-opening gate.

It is also important to consider the layout of your property when choosing the opening direction of your custom gate. If you have a long driveway, then an inward-opening gate may block access to part of it. In this case, an outward-opening gate that’s well fabricated would be a better option.

Note that if your gate is situated on an upward slope, you cannot choose a swinging gate. Instead, a sliding gate must be your option. Talk to a professional custom gate fabrication and installation company to learn more about your options and find the best solution for your needs.

Material

When it comes to custom gates, there are a variety of materials to choose from. The most popular option is wood, as it offers a classic look that can be customized to match the style of your home. However, wood does require regular maintenance to keep it looking its best. It is also prone to suffer from pest damage. But, you may choose this material after confirming that the location of your home is not prone to pest infestation.

If it is a huge gate that you are planning to install into your property, wood is not advisable. One reason for this is the fact that wood is too heavy and will become heavier when drenched in rain water.

Another popular material for custom gates is aluminum. Aluminum is durable and low-maintenance, making it a great choice for busy families.

Steel is also a good option especially if you want your custom gate to be aesthetically fabricated. Steel can easily be fabricated, thus making it the most preferred for intricately designed custom gates.

If you’re looking for a custom gate that will make a statement, consider wrought iron. Wrought iron gates are truly unique and can add curb appeal to any home. Iron is also a good option when considering durability and the ability to be easily fabricated.

No matter what material you choose, custom gates are an excellent way to enhance the security and privacy of your home. When choosing the material for your custom gate, you also need to factor in the location. You may find that not all materials are suitable for your location.

For example, those living near beaches must make sure that their custom gate material is not easily damaged by salt. This is when a custom gate made from aluminum will prove to be an ideal option for homeowners living in salt areas.

However, wrought iron and steel have the tendency to corrode and develop rusts as time goes by. This is true especially if your gate is installed in a location near the coast, thus making the area salt-laden. If you insist on using iron or steel then you would have to repaint your gates over and over again to ensure that it is protected against rust.

Electronic or Manual

When it comes to custom gates, there are a few things to consider. First, do you want an electronic or manual gate? There are pros and cons to both options. Electronic gates are more expensive upfront, but they offer the convenience of not having to get out of your car to open and close the gate.

Manual gates are more affordable, but they can be a hassle if you have to get in and out of your car every time you want to enter or exit your property.

Second, think about the installation process. Custom gates can be tricky to install, so it’s important to choose a reputable company that has experience with custom gate installation.

Once you’ve considered all of these factors, you’ll be able to make an informed decision about which type of custom gate is right for you.

However, if you think you don’t have enough money to splurge on a piece of automated gate, manual gates will be your best option.

If you’re in the market for a custom-made and fabricated gate, be sure to take all of these factors into account. A professional gate fabrication and installation company like Legend Fence can help walk you through the process and make sure your new gate is just what you’re looking for. Give us a call today for a free estimate!

How Automated Gates Increase Home Value

May 12, 2022December 20, 2021 by Llariza - Content Manager

If you’re a homeowner, then you know that adding value to your property is important. And one of the best ways to do that is by installing an automated gate system.

Automated gates provide security and privacy for your home, while also adding value to your property. So if you’re thinking about adding a gate to your home, make sure you choose an automated gate system. That way, you can rest assured knowing that your investment is well worth it. But, how do automated gates increase home value? Keep reading.

The Curb Appeal

The “curb appeal” is so important especially if you are looking to sell your property. You need to create a good impression and do everything to ensure that your home will stand out from the rest of the houses in the neighborhood. Remember that when we talk about that “curb appeal”, you only have 30 seconds to create a good impression from other people.

The quickest and easiest way to create a good impression is to install automated gates that were fabricated according to your home’s exterior design. Nothing beats the feeling of a “grand entrance” whenever you or your guests enter your premises.

Besides, if you’re looking to sell your property in the near future, note that your automated gate will be the first one that potential buyers will see. Your entrance has to look inviting to be able to convince the buyer to come inside and see what your property has to offer. And, for this part, one thing is for certain – beautifully crafted, custom-made automated gates won’t let you down!

Higher Return on Investment

Having automated gates that were designed with excellent workmanship can increase home value for up to $50,000 or more. So, once you decide to install automated gates, make sure it is custom made and fabricated to perfection!

Automated gates do a great job in providing ease of access. It will also make your property more fitting in an upscale neighborhood. This is why it is important to choose an automated gate with a design that is well fabricated to match the overall appeal and aesthetics of your home.

When choosing the design for an automated gate, you also need to take into consideration the style of its surroundings. It should blend well into the existing look of the neighborhood. But the design should not be something that’s too attention grabbing. Otherwise, your home will become too attractive to criminals.

A similar looking automated gate, with a bit of uniqueness into it will make your home more well integrated into the overall look of your surroundings. Choosing a timeless design is also a good idea to ensure your property won’t look outdated in the near future.

Remember that you can never tell what your future buyers might prefer. So, choosing an automated gate with a timeless design will help guarantee you will still get the most out of your investment by the time you decide to sell your property.

You also need to show to potential buyers that your home’s security system will more likely give them a higher return on investment in the future. But, how do you convince them that your home is attractive and consists of everything that they desire for a home? Start with showing them how aesthetically fabricated your automated gates are.

The moment your buyer stops to take a peek into your property, your gate has to make them curious enough. Your home’s exterior has to to instantly attract them in and have them take a look at what’s inside your property. Otherwise, you’re going to have a hard time selling your home.

Greater Sense of Security

Estate agents consider automated gates as added value to a property. Besides, insurance companies will also factor in the existence of your home’s automated gates so you can pay lower premiums. Insurance companies know that automated gates boost the level of security of any property. Automated gates work as a signal to your insurance provider that you limit the number of people that enter your property.

Automated gates can also be much more difficult for would-be intruders to bypass, making them an excellent deterrent against crime. These automated gates will give criminals a hard time entering into your property. In turn, they are less likely to pick your home as among their targets.

Although automated gates have been around for many years, they have become increasingly popular in recent years as homeowners look for ways to improve security. Automated gates offer a number of advantages over traditional gates, including the ability to control access to a property and the added sense of security that comes from knowing that the gate is always closed.

Automated gates add value to your home and give you a sense of security. If you are interested in adding an automated gate that’s custom made and fabricated to suit your preference, call Legend Fence for a free estimate. We have more than 20 years of experience fabricating & installing quality gates that will meet your needs and increase the value of your home.